15-5 PH — Machining & Properties
Typical properties, what 15-5 PH is like on a machine tool, what it gets used for, and the tolerance and finishes we hold on it — from a shop that actually machines it, not a datasheet aggregator. Every figure here drives our own calculators.
Machining 15-5 PH
Machinability is rated moderate — machinable without drama, but it rewards proper tooling, feeds and speeds — cycle times sit above the easy-cutting grades. Austenitic grades (303, 304, 316) work-harden during cutting. Sharp tooling, correct feeds and speeds, and no dwelling are essential. Martensitic and PH grades should be machined in the annealed condition where possible, with final heat treatment applied post-machining to minimise distortion.
Our standard achievable tolerance on 15-5 PH is ±0.010mm under normal conditions, with tighter tolerances on critical features agreed at quotation. Standard finishes: Passivation. Full material traceability with MTR and CoC documentation on every order.
Typical applications
Aerospace structural, high-pressure valves, surgical instruments.
Use 15-5 PH in our free tools
Other stainless steel grades we machine: 303 · 304 / 304L · 316 / 316L · 17-4 PH (630) — all 50 grades.
15-5 PH — FAQ
What is the density of 15-5 PH?
7.78 g/cm³ (typical). That is 7780 kg/m³ — our metal weight calculator uses exactly this figure for 15-5 PH.
What is the tensile strength of 15-5 PH?
Typically 1310 MPa. Treat it as a typical value, not a specification — the Material Test Report supplied with your order states the actual certified figures for the batch.
Is 15-5 PH easy to machine?
Its machinability is rated moderate — machinable without drama, but it rewards proper tooling, feeds and speeds — cycle times sit above the easy-cutting grades.
What is 15-5 PH used for?
Typical applications: Aerospace structural, high-pressure valves, surgical instruments.
What tolerance can be held when machining 15-5 PH?
Our standard achievable tolerance on 15-5 PH is ±0.010mm under normal conditions (ISO 2768-f general tolerancing). Tighter tolerances on critical features can be agreed at quotation for specific geometries.
Can Dalloway machine 15-5 PH?
Yes — we machine 15-5 PH in-house on 3, 4 and 5-axis milling and CNC turning, from single prototypes to production, with MTR and CoC documentation standard. Typical finishes: Passivation.
Send Your Drawing for a Same-Day Quote
Talk directly to the engineers who will machine your parts — no account managers, no trading-company markups. Complimentary DFM review with every enquiry.