5083-H111 — Machining & Properties
Typical properties, what 5083-H111 is like on a machine tool, what it gets used for, and the tolerance and finishes we hold on it — from a shop that actually machines it, not a datasheet aggregator. Every figure here drives our own calculators.
Machining 5083-H111
Machinability is rated good — a well-behaved material to machine with correctly chosen tooling and parameters. Aluminium has a high thermal expansion coefficient (~23 × 10⁻⁶ /°C). On large features, allow parts and tooling to reach thermal equilibrium before inspection.
Our standard achievable tolerance on 5083-H111 is ±0.010mm under normal conditions, with tighter tolerances on critical features agreed at quotation. Standard finishes: As machined, Anodise Type II. Full material traceability with MTR and CoC documentation on every order.
Typical applications
Marine, cryogenic vessels, pressure vessels, LNG.
Use 5083-H111 in our free tools
Other aluminium grades we machine: 1050A H14 · 2024-T4 · 6061-T6 · 6082-T6 — all 50 grades.
5083-H111 — FAQ
What is the density of 5083-H111?
2.66 g/cm³ (typical). That is 2660 kg/m³ — our metal weight calculator uses exactly this figure for 5083-H111.
What is the tensile strength of 5083-H111?
Typically 290 MPa. Treat it as a typical value, not a specification — the Material Test Report supplied with your order states the actual certified figures for the batch.
Is 5083-H111 easy to machine?
Its machinability is rated good — a well-behaved material to machine with correctly chosen tooling and parameters.
What is 5083-H111 used for?
Typical applications: Marine, cryogenic vessels, pressure vessels, LNG.
What tolerance can be held when machining 5083-H111?
Our standard achievable tolerance on 5083-H111 is ±0.010mm under normal conditions (ISO 2768-f general tolerancing). Tighter tolerances on critical features can be agreed at quotation for specific geometries.
Can Dalloway machine 5083-H111?
Yes — we machine 5083-H111 in-house on 3, 4 and 5-axis milling and CNC turning, from single prototypes to production, with MTR and CoC documentation standard. Typical finishes: As machined, Anodise Type II.
Send Your Drawing for a Same-Day Quote
Talk directly to the engineers who will machine your parts — no account managers, no trading-company markups. Complimentary DFM review with every enquiry.