PEEK-CF30 — Machining & Properties
Typical properties, what PEEK-CF30 is like on a machine tool, what it gets used for, and the tolerance and finishes we hold on it — from a shop that actually machines it, not a datasheet aggregator. Every figure here drives our own calculators.
Machining PEEK-CF30
Machinability is rated good — a well-behaved material to machine with correctly chosen tooling and parameters. Engineering polymers have significantly higher thermal expansion coefficients than metals. All plastic components must be inspected at a controlled temperature, and tolerances tighter than ±0.020 mm are generally not maintainable in service without dimensional constraints in the design.
Our standard achievable tolerance on PEEK-CF30 is ±0.020mm under normal conditions, with tighter tolerances on critical features agreed at quotation. Standard finishes: 30% carbon fibre reinforced. Full material traceability with MTR and CoC documentation on every order.
Typical applications
Lightweight structural aerospace parts, stiff brackets and fixtures.
Use PEEK-CF30 in our free tools
Other engineering plastic grades we machine: PEEK (Unfilled) · Delrin POM-C · Delrin POM-H · Nylon PA6 — all 50 grades.
PEEK-CF30 — FAQ
What is the density of PEEK-CF30?
1.44 g/cm³ (typical). That is 1440 kg/m³ — our metal weight calculator uses exactly this figure for PEEK-CF30.
What is the tensile strength of PEEK-CF30?
Typically 210 MPa. Treat it as a typical value, not a specification — the Material Test Report supplied with your order states the actual certified figures for the batch.
Is PEEK-CF30 easy to machine?
Its machinability is rated good — a well-behaved material to machine with correctly chosen tooling and parameters.
What is PEEK-CF30 used for?
Typical applications: Lightweight structural aerospace parts, stiff brackets and fixtures.
What tolerance can be held when machining PEEK-CF30?
Our standard achievable tolerance on PEEK-CF30 is ±0.020mm under normal conditions (ISO 2768-f general tolerancing). Tighter tolerances on critical features can be agreed at quotation for specific geometries.
Can Dalloway machine PEEK-CF30?
Yes — we machine PEEK-CF30 in-house on 3, 4 and 5-axis milling and CNC turning, from single prototypes to production, with MTR and CoC documentation standard. Typical finishes: 30% carbon fibre reinforced.
Send Your Drawing for a Same-Day Quote
Talk directly to the engineers who will machine your parts — no account managers, no trading-company markups. Complimentary DFM review with every enquiry.